Sponsored Links
-->

Thursday, February 1, 2018

File:Cirrus clouds mar08.jpg - Wikimedia Commons
src: upload.wikimedia.org

Cirrus (cloud classification symbol: Ci) is a genus of atmospheric cloud generally characterized by thin, wispy strands, giving the type its name from the Latin word cirrus, meaning a ringlet or curling lock of hair. This cloud can form at any altitude between 16,500 ft (5.0 km) and 45,000 ft (14 km) above sea level. The strands of cloud sometimes appear in tufts of a distinctive form referred to by the common name of "mares' tails".

On planet Earth, cirrus generally appears white or light gray in color. It forms when water vapor undergoes deposition at altitudes above 5,500 m (18,000 ft) in temperate regions and above 6,400 m (21,000 ft) in tropical regions. It also forms from the outflow of tropical cyclones or the anvils of cumulonimbus clouds. Since cirrus clouds arrive in advance of the frontal system or tropical cyclone, it indicates that weather conditions may soon deteriorate. While it indicates the arrival of precipitation (rain), cirrus clouds only produce fall streaks (falling ice crystals that evaporate before landing on the ground).

Jet stream-powered cirrus can grow long enough to stretch across continents while remaining only a few kilometers deep. When visible light interacts with the ice crystals in cirrus cloud, it produces optical phenomena such as sun dogs and halos. Cirrus is known to raise the temperature of the air beneath the main cloud layer by an average of 10 °C (18 °F). When the individual filaments become so extensive that they are virtually indistinguishable from one another, they form a sheet of high cloud called cirrostratus. Convection at high altitudes can produce another high-based genus called cirrocumulus, a pattern of small cloud tufts that contain droplets of supercooled water.

Cirrus clouds form on other planets, including Mars, Jupiter, Saturn, Uranus, and possibly Neptune. They have even been seen on Titan, one of Saturn's moons. Some of these extraterrestrial cirrus clouds are composed of ammonia or methane ice rather than water ice. The term cirrus is also used for certain interstellar clouds composed of sub-micrometer-sized dust grains.


Video Cirrus cloud



Description

Cirrus cloud ranges in thickness from 100 m (330 ft) to 8,000 m (26,000 ft), with an average thickness of 1,500 m (4,900 ft). There are, on average, 30 ice crystals per liter (96 ice crystals per gallon), but this ranges from one ice crystal per 10,000 liters (3.7 ice crystals per 10,000 gallons) to 10,000 ice crystals per liter (37,000 ice crystals per gallon), a difference of eight orders of magnitude. The length of each of these ice crystals is usually 0.25 millimeters long, but they range from as short as 0.01 millimeters or as long as several millimeters. The ice crystals in contrails are much smaller than those in naturally occurring cirrus cloud, as they are around 0.001 millimeters to 0.1 millimeters in length. Cirrus can vary in temperature from -20 °C (-4 °F) to -30 °C (-22 °F).

The ice crystals in cirrus clouds have different shapes in addition to different sizes. Some shapes include solid columns, hollow columns, plates, rosettes, and conglomerations of the various other types. The shape of the ice crystals is determined by the air temperature, atmospheric pressure, and ice supersaturation. Cirrus in temperate regions typically have the shapes segregated by type: the columns and plates tend to be at the top of the cloud, whereas the rosettes and conglomerations tend to be near the base. In the northern Arctic region, cirrus tend to be composed of only the columns, plates, and conglomerations, and these crystals tend to be at least four times larger than the minimum size. In Antarctica, cirrus are usually composed of only the columns, and these columns are much longer than normal.

Scientists have studied the characteristics of cirrus using several different methods. One, Light Detection and Ranging (LiDAR), gives highly accurate information on the cloud's altitude, length, and width. Balloon-carried hygrometers give information on the humidity of the cirrus cloud but are not accurate enough to measure the depth of the cloud. Radar units give information on the altitudes and thicknesses of cirrus clouds. Another data source is satellite measurements from the Stratospheric Aerosol and Gas Experiment (SAGE) program. These satellites measure where infrared radiation is absorbed in the atmosphere, and if it is absorbed at cirrus altitudes, then it is assumed that there are cirrus clouds in that location. The United States National Aeronautics and Space Administration's (NASA) MODerate resolution Imaging Spectroradiometer (MODIS) also gives information on the cirrus cloud cover by measuring reflected infrared radiation of various specific frequencies during the day. During the night, it determines cirrus cover by detecting the Earth's infrared emissions. The cloud reflects this radiation back to the ground, thus enabling satellites to see the "shadow" it casts into space. Visual observations from aircraft or the ground provide additional information about cirrus clouds.

Based upon data taken from the United States using these methods, cirrus cloud cover was found to vary diurnally and seasonally. The researchers found that in the summer, at noon, the cover is the lowest, with an average of 23% of the United States' land area covered by cirrus. Around midnight, the cloud cover increases to around 28%. In winter, the cirrus cloud cover did not vary appreciably from day to night. These percentages include clear days and nights, as well as days and nights with other cloud types, as lack of cirrus cloud cover. When these clouds are present, the typical coverage ranges from 30% to 50%. Based on satellite data, cirrus covers an average of 20% to 25% of the Earth's surface. In the tropical regions, this cloud covers around 70% of the region's surface area.

Cirrus clouds often produce hair-like filaments--similar to the virga produced in liquid-water clouds--called fall streaks, and they are made of heavier ice crystals that fall from the cloud. The sizes and shapes of fall streaks are determined by the wind shear.

Cirrus comes in four distinct species; Cirrus castellanus, fibratus, spissatus, and uncinus; which are each divided into four varieties: intortus, vertebratus, radiatus, and duplicatus. Cirrus castellanus is a species that has cumuliform tops caused by high-altitude convection rising up from the main cloud body. Cirrus fibratus looks striated and is the most common cirrus species. Cirrus uncinus clouds are hooked and are the form that is usually called mare's tails. Of the varieties, Cirrus intortus has an extremely contorted shape, and cirrus radiatus has large, radial bands of cirrus clouds that stretch across the sky. Kelvin-Helmholtz waves are a form of cirrus intortus that has been twisted into loops by vertical wind shear.


Maps Cirrus cloud



Formation

Cirrus clouds are formed when water vapor undergoes deposition at high altitudes where the atmospheric pressure ranges from 600 mbar at 4,000 m (13,000 ft) above sea level to 200 mbar at 12,000 m (39,000 ft) above sea level. These conditions commonly occur at the leading edge of a warm front. Because humidity is low at such high altitudes, this genus-type tends to be very thin. Cirrus clouds are composed of ice crystals that originate from the freezing of super cooled water droplets in regions where air temperature is lower than -20 °C or -30 °C.Cirrus usually occur in fair weather.They are formed when it is high enough to be cold and freeze the water drops into ice. They sometimes may be caused by turbulence and wind shear, or by upper-tropospheric convection. Sometimes they are like blown out ice-crystals spreading from the top of a dying cumulonimbus.

Cyclones

Cirrus forms from tropical cyclones, and is commonly seen fanning out from the eyewalls of hurricanes. A large shield of cirrus and cirrostratus typically accompanies the high altitude outflow of hurricanes or typhoons, and these can make the underlying rain bands--and sometimes even the eye--difficult to detect in satellite photographs.

Thunderstorms

Thunderstorms can form dense cirrus at their tops. As the cumulonimbus cloud in a thunderstorm grows vertically, the liquid water droplets freeze when the air temperature reaches the freezing point. The anvil cloud takes its shape because the temperature inversion at the tropopause prevents the warm, moist air forming the thunderstorm from rising any higher, thus creating the flat top. In the tropics, these thunderstorms occasionally produce copious amounts of cirrus from their anvils. High-altitude winds commonly push this dense mat out into an anvil shape that stretches downwind as much as several kilometers.

Individual cirrus cloud formations can be the remnants of anvil clouds formed by thunderstorms. In the dissipating stage of a cumulonimbus cloud, when the normal column rising up to the anvil has evaporated or dissipated, the mat of cirrus in the anvil is all that is left.

Contrails

Contrails are a manmade type of cirrus cloud formed when water vapor from the exhaust of a jet engine condenses on particles, which come from either the surrounding air or the exhaust itself, and freezes, leaving behind a visible trail. The exhaust can also trigger the formation of cirrus by providing ice nuclei when there is an insufficient naturally-occurring supply in the atmosphere. One of the environmental impacts of aviation is that persistent contrails can form into large mats of cirrus, and increased air traffic has been implicated as one possible cause of the increasing frequency and amount of cirrus in Earth's atmosphere.


Clouds clipart cirrus - Pencil and in color clouds clipart cirrus
src: moziru.com


Subforms

Species

Cirrus Fibratus clouds appear as thin and fibrous looking. Noticeably, they are the most common type of cirrus cloud. They might indicate windy weather, since they are mostly formed by wind shear on higher altitudes.

Cirrus Uncinus clouds appear as thin and fibrous like, except that they always have a hook or curl on the tip.

Cirrus Spissatus clouds are the highest clouds of the main cloud genera. They may form in the higher tropopause or even at the lower stratosphere. They are dense and opaque, not allowing the light of the sun or moon to pass through. They are more common on the anvils of cumulonimbus clouds.

Cirrus Floccus is derived from Latin, which means "lock of wool" or cirrus with ragged bases. They are not to be confused with cirrocumulus floccus since they are larger than cirrocumulus and mostly are isolated. A precipitation-based supplementary feature virga is mostly visible, which makes it easier to distinguish the difference between cirrocumulus floccus and cirrus floccus.

Cirrus Castellanus is derived from Latin, which means "castle" or round turrets. They indicate that atmospheric instability is occurring on the higher altitudes of the troposphere. They appear as tall clouds that originate from a flat base.

Opacity-based Varieties

Cirrus clouds are translucent and so have no opacity-based varieties; only one species is opaque, which is cirrus spissatus.

Pattern-based Varieties

Cirrus Intortus clouds is derived from Latin which means "twisted", or "wound". These clouds appear twisted, or simply, intorted.

Cirrus Vertebratus clouds, resembling the appearance of bones as hinted by the word "vertebratus". They look more like fish bones, with fibrous lines that originate from one which resembles the appearance of fish bones.

Cirrus Radiatus clouds appear as parallel lines that seem to originate from one point and can stretch for hundreds of miles, and they move parallel to the wind shear.


S'COOL - Cirrus Cloud
src: scool.larc.nasa.gov


Use in forecasting

Random, isolated cirrus do not have any particular significance. A large number of cirrus clouds can be a sign of an approaching frontal system or upper air disturbance. This signals a change in weather in the near future, which usually becomes stormier. If the cloud is a cirrus castellanus, there might be instability at the high altitude level. When the clouds deepen and spread, especially when they are of the cirrus radiatus variety or cirrus fibratus species, this usually indicates an approaching weather front. If it is a warm front, the cirrus clouds spread out into cirrostratus, which then thicken and lower into altocumulus and altostratus. The next set of clouds are the rain-bearing nimbostratus clouds. When cirrus clouds precede a cold front, squall line or multicellular thunderstorm, it is because they are blown off the anvil, and the next to arrive are the cumulonimbus clouds. Kelvin-Helmholtz waves indicate extreme wind shear at high levels.

Within the tropics, 36 hours prior to the center passage of a tropical cyclone, a veil of white cirrus clouds approaches from the direction of the cyclone. In the mid to late 19th century, forecasters used these cirrus veils to predict the arrival of hurricanes. In the early 1870s the president of Belén College in Havana, Cuba, Father Benito Viñes, developed the first hurricane forecasting system, and he mainly used the motion of these clouds in formulating his predictions. He would observe the clouds hourly from 4:00 am to 10:00 pm. After accumulating enough information, Viñes began accurately predicting the paths of hurricanes, and he eventually summarized his observations in his book, Apuntes Relativos a los Huracanes de las Antilles.


File:Cirrus sky panorama.jpg - Wikipedia
src: upload.wikimedia.org


Effects on climate

Cirrus clouds cover up to 25% of the Earth (up to 70% in the tropics) and have a net heating effect. When they are thin and translucent, the clouds efficiently absorb outgoing infrared radiation while only marginally reflecting the incoming sunlight. When cirrus clouds are 100 m (330 ft) thick, they reflect only around 9% of the incoming sunlight, but they prevent almost 50% of the outgoing infrared radiation from escaping, thus raising the temperature of the atmosphere beneath the clouds by an average of 10 °C (18 °F)--a process known as the greenhouse effect. Averaged worldwide, cloud formation results in a temperature loss of 5 °C (9 °F) at the earth's surface, mainly the result of stratocumulus clouds.

As a result of their warming effects when relatively thin, cirrus clouds have been implicated as a potential partial cause of global warming. Scientists have speculated that global warming could cause high thin cloud cover to increase, thereby increasing temperatures and humidity. This, in turn, would increase the cirrus cloud cover, effectively creating a positive feedback circuit. A prediction of this hypothesis is that the cirrus would move higher as the temperatures rose, increasing the volume of air underneath the clouds and the amount of infrared radiation reflected back down to earth. In addition, the hypothesis suggests that the increase in temperature would tend to increase the size of the ice crystals in the cirrus cloud, possibly causing the reflection of solar radiation and the reflection of the Earth's infrared radiation to balance out.

A similar hypothesis put forth by Richard Lindzen is the iris hypothesis in which an increase in tropical sea surface temperatures results in less cirrus clouds and thus more infrared radiation emitted to space.


Watch a cloud being born | Science | AAAS
src: www.sciencemag.org


Optical phenomena

Cirrus clouds, like cirrostratus clouds, can produce several optical effects, such as halos around the sun and moon. Halos are caused by interaction of the light with hexagonal ice crystals present in the clouds, which, depending on their shape and orientation, can result in a wide variety of white and colored rings, arcs and spots in the sky. Common halo varieties are the 22° halo, sun dogs, the circumzenithal arc and the circumhorizontal arc (also known as fire rainbows). Halos produced by cirrus clouds tend to be more pronounced and colorful than those caused by cirrostratus.

More rarely, cirrus clouds are capable of producing glories, more commonly associated with liquid water-based clouds such as stratus. A glory is a set of concentric, faintly-colored glowing rings that appear around the shadow of the observer, and are best observed from a high viewpoint or from a plane. Cirrus clouds only form glories when the constituent ice crystals are aspherical, and researchers suggest that the ice crystals must be between 0.009 millimeters and 0.015 millimeters in length.


Reflect the cirrus clouds of a crisp October sky | The texture of ...
src: s-media-cache-ak0.pinimg.com


Relation to other clouds

Cirrus clouds are one of three different genera of high-étage (high-level) clouds. High-étage clouds form at 5,000 m (16,500 ft) and above in temperate regions. The other two genera, cirrocumulus and cirrostratus, are also high clouds.

In the intermediate range, from 2,000 m (6,500 ft) to 7,000 m (23,000 ft) in temperate regions, are the mid-étage clouds. They comprise two or three genera depending on the system of height classification being used: altostratus, altocumulus, and, according to WMO classification, nimbostratus. These clouds are formed from ice crystals, supercooled water droplets, or liquid water droplets.

Low-étage clouds form at less than 2,000 m (6,500 ft). The two genera that are strictly low-étage are stratus, and stratocumulus. These clouds are composed of water droplets, except during winter when they are formed of supercooled waterdroplets or ice crystals if the temperature at cloud level is below freezing. Two additional genera usually form in the low altitude range, but may be based at higher levels under conditions of very low humidity. They comprise the genera cumulus, and cumulonimbus, which along with nimbostratus, are often classified separately as clouds of vertical development, especially when their tops are high enough to be composed of super-cooled water droplets or ice crystals.

The altitudes of high-étage clouds like cirrus vary considerably with latitude. In the polar regions, they are at their lowest, with a minimum altitude of only 3,000 m (10,000 ft) to a maximum of 7,600 m (25,000 ft). In tropical regions, they are at their highest, ranging in altitude from about 6,100 m (20,000 ft) to around 18,000 m (60,000 ft). In temperate regions, they range in altitude from 5,000 m (16,500 ft) to 14,000 m (45,000 ft)--a variation in contrast to low-étage clouds, which do not appreciably change altitude with latitude.

Summary of high cloud genera

There are three main genera in the family of high clouds: cirrus, cirrocumulus, and cirrostratus. Cirrostratus clouds commonly produce halos because they are composed almost entirely of ice crystals. Cirrocumulus and cirrostratus are sometimes informally referred to as "cirriform clouds" because of their frequent association with cirrus. They are given the prefix "cirro-", but this refers more to their altitude range than their physical structure. Cirrocumulus in its pure form is actually a high cumuliform genus, and cirrostratus is stratiform, like altostratus and lower based sheet clouds.

Cirrocumulus

Cirrocumulus clouds form in sheets or patches and do not cast shadows. They commonly appear in regular, rippling patterns or in rows of clouds with clear areas between. Cirrocumulus are, like other members of the cumuliform category, formed via convective processes. Significant growth of these patches indicates high-altitude instability and can signal the approach of poorer weather. The ice crystals in the bottoms of cirrocumulus clouds tend to be in the form of hexagonal cylinders. They are not solid, but instead tend to have stepped funnels coming in from the ends. Towards the top of the cloud, these crystals have a tendency to clump together. These clouds do not last long, and they tend to change into cirrus because as the water vapor continues to deposit on the ice crystals, they eventually begin to fall, destroying the upward convection. The cloud then dissipates into cirrus. Cirrocumulus clouds come in four species: stratiformis, lenticularis, castellanus, and floccus. They are iridescent when the constituent supercooled water droplets are all about the same size.

Cirrostratus

Cirrostratus clouds can appear as a milky sheen in the sky or as a striated sheet. They are sometimes similar to altostratus and are distinguishable from the latter because the sun or moon is always clearly visible through transparent cirrostratus, in contrast to altostratus which tends to be opaque or translucent. Cirrostratus come in two species, fibratus and nebulosus. The ice crystals in these clouds vary depending upon the height in the cloud. Towards the bottom, at temperatures of around -35 °C (-31 °F) to -45 °C (-49 °F), the crystals tend to be long, solid, hexagonal columns. Towards the top of the cloud, at temperatures of around -47 °C (-53 °F) to -52 °C (-62 °F), the predominant crystal types are thick, hexagonal plates and short, solid, hexagonal columns. These clouds commonly produce halos, and sometimes the halo is the only indication that such clouds are present. They are formed by warm, moist air being lifted slowly to a very high altitude. When a warm front approaches, cirrostratus clouds become thicker and descend forming altostratus clouds, and rain usually begins 12 to 24 hours later.


Cirrus Clouds
src: mstecker.com


Extraterrestrial

Cirrus clouds have been observed on several other planets. On 18 September 2008, the Martian Lander Phoenix took a time-lapse photograph of a group of cirrus clouds moving across the Martian sky using LiDAR. Near the end of its mission, the Phoenix Lander detected more thin clouds close to the north pole of Mars. Over the course of several days, they thickened, lowered, and eventually began snowing. The total precipitation was only a few thousandths of a millimeter. James Whiteway from York University concluded that "precipitation is a component of the [Martian] hydrologic cycle." These clouds formed during the Martian night in two layers, one around 4,000 m (13,000 ft) above ground and the other at surface level. They lasted through early morning before being burned away by the sun. The crystals in these clouds were formed at a temperature of -65 °C (-85 °F), and they were shaped roughly like ellipsoids 0.127 millimeters long and 0.042 millimeters wide.

On Jupiter, cirrus clouds are composed of ammonia. When Jupiter's South Equatorial Belt disappeared, one hypothesis put forward by Glenn Orten was that a large quantity of ammonia cirrus clouds had formed above it, hiding it from view. NASA's Cassini probe detected these clouds on Saturn and thin water-ice cirrus on Saturn's moon Titan. Cirrus clouds composed of methane ice exist on Uranus. On Neptune, thin wispy clouds which could possibly be cirrus have been detected over the Great Dark Spot. As on Uranus, these are probably methane crystals.

Interstellar cirrus clouds are composed of tiny dust grains smaller than a micrometer and are therefore not true clouds of this genus which are composed of ice crystals or other frozen liquids. They range from a few light years to dozens of light years across. While they are not technically cirrus clouds, the dust clouds are referred to as "cirrus" because of their similarity to the clouds on Earth. They also emit infrared radiation, similar to the way cirrus clouds on Earth reflect heat being radiated out into space.


File:CirrusField-color.jpg - Wikimedia Commons
src: upload.wikimedia.org


See also

  • Cirrus cloud thinning
  • Optical Phenomena (Sun halos)
  • Cloud Types

Jet Stream Cirrus Clouds | Royal Meteorological Society
src: www.rmets.org


Sources

Footnotes

Bibliography


Clouds (1)
src: geogrify.net


External links

  • A cloud atlas with many photos and description of the different cloud genera
  • UIUC.edu's online guide to meteorology
  • International Cloud Atlas - Cirrus

Source of the article : Wikipedia

Comments
0 Comments